Prototype: Köf III small diesel locomotive as the German Federal Railroad (DB) class Köf 11 in Era III. Crimson paint scheme. One type E-52 Omm gondola and one type Gmhs 55 boxcar, both painted and lettered for the German Federal Railroad (DB).
Article No. | 26340 |
---|---|
Gauge / Design type | H0 / 1:87 |
Era | III |
Kind | Train Sets |
Model: The locomotive has an mfx digital decoder and controlled high efficiency propulsion. Both axles powered. The triple headlights and dual red marker lights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights are maintenance-free LEDs. The headlights / marker lights can be turned off at both ends. The Telex couplers at the front and the rear can be controlled separately. There is an open view in the engineer's cab, and the grab irons are separately applied.
Length over the buffers for the locomotive 9 cm / 3-1/2".
Total length over the buffers 32.4 cm / 12-3/4".
This model can be found in a DC version in the Trix H0 assortment under item no. 21340.
Find more Märklin explanation videos on our YouTube Channel
Spare parts for our articles can be found here in our spare parts search.
The Köf III Starting in the mid-Fifties it was evident that the small locomotives Performance Group II were no longer able to meet expectations. For that reason development was begun starting in 1958 for more powerful small locomotives in Performance Group III with more than 150 horsepower because there was a need on the German Federal Railroad (DB) for more powerful small locomotives that could also be used to pull heavy freight trains in transfer service. Power was transmitted from the motor via universal joint shafts to a hydraulic transmission and further by means of roller chains to the wheel sets. Between 1962 and 1966 a total of 312 units as road numbers Köf 11 006-317 were delivered with 240 horsepower motors and Voith transmissions. These units consisted of a frame with an engineer's cab arranged facing the rear. The frame consisted of box-shaped sheet metal members welded together with connecting sheet metal cross member pieces welded into the structure which ensured the necessary rigidity for the design. The interchangeable buffer beams were mounted on prefabricated plank-shaped metal members. The engineer's cab was supposed to give a good view in all directions and was therefore set as low as possible.
Control Unit | Mobile Station | Mobile Station 2 | Central Station 1/2 | Central
Station 3/2* Mobile Station 2** |
|
---|---|---|---|---|---|
Headlight(s) | |||||
Telex coupler on the rear | |||||
Telex coupler on the front | |||||
Direct control | |||||
Headlight(s): Cab2 End | |||||
Headlight(s): Cab1 End |
* New features of the Central Station 2 (Part No. 60213, 60214 or 60215) with the software update 4.2
** New features of the Mobile Station 2 (Part No. 60657/66955) with the Software Update 3.55