Gauge H0 - Article No. 7041

Home Signal.

Home Signal.
Home Signal.

Most Important Facts

Article No. 7041
Gauge / Design type H0 / 1:87
Kind Signals
Article not produced anymore.
Check with your local dealer
Find Dealer
  • Product description

    The signal has 2 independent semaphores. The signal changes from red to green or red to green/yellow. It has 3 solenoids. A base plate is included. Width 27 mm / 1-1/16". Length 97 mm / 2-9/16". Height 125 mm / 5".

    Find more Märklin explanation videos on our YouTube Channel

    Spare parts for our articles can be found here in our spare parts search.

  • Publications

    - Product programme 2000 / 2001 - Product programme 2001 / 2002 - Product programme 2002 / 2003 - Product programme 2003/2004 - Product programme 2005 - Product programme 2006 - Product programme 2008/2009 - Product programme 2009/2010 - Product programme 2010/2011
  • Prototype information

    Stop and Go on the Railroad. Model signals fulfill important control and safety functions just like those of the prototype. Märklin signals control traffic, because they not only show prototypical signal aspects, they also directly influence the movement of trains. When set for "stop" they turn off current in their area to the center rail and to the catenary - the train remains stopped. When set for "slow" or "full speed" they turn the current on - the train travels through the area or starts up again. If you want to be even more realistic, you can set up distant signals at the proper intervals; these are connected in tandem with their home signals and show the same signal aspects. Color light and semaphore/target signals are controlled with the 7272/72720 control box and in the Digital system with the accessory decoders. In conjunction with circuit tracks or reed switches, signals can also be controlled by trains in operation, thereby automating many operating procedures.

Warning

ATTENTION: not for children under 3 years