VT 11.5, TEE, DB | Gauge H0 - Article No. 37604

VT 11.5 TEE Diesel Powered Rail Car Train

Prototype: German Federal Railroad (DB) class VT 11.5 "Helvetia" TEE diesel powered rail car train. Train route: Zürich – Basle – Mannheim – Frankfurt – Hamburg. 2 type Pw4ü powered end cars, 1 type A4ü compartment car, 1st class, 1 type WR4y intermediate car with galley / dining area. Classic crimson/beige TEE paint scheme. The train looks as it did around 1957.

) ? c # h N + j 3 Y
VT 11.5 TEE Diesel Powered Rail Car Train
VT 11.5 TEE Diesel Powered Rail Car Train
VT 11.5 TEE Diesel Powered Rail Car Train
VT 11.5 TEE Diesel Powered Rail Car Train

Most Important Facts

Article No. 37604
Gauge / Design type H0 / 1:87
Kind Powered Rail Cars
Article not produced anymore.
Check with your local dealer
Find Dealer


  • The powered end cars and the intermediate cars constructed chiefly of metal.
  • mfx+ World of Operation digital decoder and extensive sound functions included.
  • Factory built-in interior lighting with warm white LEDs.
  • Product description

    Model: The train is a 4-part set. It has an mfx+ digital decoder and extensive sound functions. Each powered end car has controlled high-efficiency propulsion. Each powered end car has a truck with both axles powered. Traction tires. The intermediate cars have factory built-in interior lighting. The triple headlights and dual red marker lights change over with the direction of travel. They and the interior lighting will work in conventional operation and can be controlled digitally. Maintenance-free, warm white and red LEDs are used for the lighting. The train has a power pickup feature whereby power is picked up from the pickup shoe in the powered end car at the front of the train. The train has special multiple conductor close couplings and tight closing diaphragms with guide mechanisms between the cars. The ends of the train has a reproduction of the covered Scharfenberg coupler (non-working) at both ends.
    Train length over the couplers 88 cm / 34-5/8".

    The 37604 basic set can extended to a prototypical 7-part train with the 43114 add-on car set.

    A DC model of this basic set can be found in the Trix H0 assortment under item number 22261.

    Find more Märklin explanation videos on our YouTube Channel

    Spare parts for our articles can be found here in our spare parts search.

    One-time series.

  • Publications

    - Special Imprint and Special Products - New items brochure 2016 - Product programme 2016/2017
  • Prototype information

    Many European railroads purchased powered rail cars for Trans-Europe-Express-service (TEE) that fulfilled the highest demands for comfort and that offered 1st class seating only. The DB decided on a powered rail car train based on the "Kruckenberg" VT 137 155 and the successful V 200. The basic configuration consisted of two powered end cars as well as five intermediate cars. This train could be expanded to a ten-unit consist by adding additional intermediate cars. The drive gear came from the V 200: Each powered end car was equipped with a 1,100 horsepower motor that transmitted propulsion to the wheel sets in the power truck by means of a hydraulic transmission and universal joint shafts. A 296 horsepower auxiliary diesel motor with a generator connected directly to it ensured electrical power exclusively for the galley and the air conditioning. The following was delivered in 1957/58: 19 powered end cars (VT 11 5001-5019), 23 compartment cars (VM 11 5101-5123), eight open seating cars (VM 11 5201-5208), eight bar cars (VM 11 5301-5308), and nine dining cars (VM 11 5401-5409). The "Helvetia" linked the North of Germany to Switzerland since the start of the TEE network on June 2, 1957 and was among the "founding members" and thereby the first of the TEE trains. Initially, the new class VT 11.5 TEE diesel powered rail car trains were available for this routing (Hamburg – Frankfurt – Mannheim – Basle – Zürich). Yet as early as April 12, 1965 the Helvetia advanced to the first locomotive-hauled TEE in Germany, because with increasing electrification more and more TEE trains were converted to locomotive-hauled trains. The last of the TEE trains to be converted was the "Mediolanum" on August 20, 1972. From 1971 on, the TEE sets, designated as the class 601/901 from 1968 on, found new activity in the lntercity network. With the introduction of 2nd class in IC service, the class 601 powered rail car trains were once again without work for the summer schedule of 1979. A large part of these units was in use again in tourist service starting in the summer of 1980. These units with their elegant form ran as the "Alpen-See-Express" / "Alps-Sea-Express" from Hamburg and Dortmund to different South German and Austrian vacation regions, sometimes even as double units on certain parts of routes. The last use of the former TEE powered rail car trains as the "Alpen-See-Express" took place on April 9, 1988. Shortly after that, all of the trains were retired.

  • Digital Functions

    Control Unit Mobile Station Mobile Station 2 Central Station 1/2 Central Station 3/2*
    Mobile Station 2**
    Interior lights
    Diesel locomotive op. sounds
    Sound of squealing brakes off
    Station Announcements
    Conductor's Whistle
    Station Announcements
    Doors Closing
    Direct control
    Operating Sounds 1
    Blower motors
    Brake Compressor
    Operating Sounds 2
    Operating Sounds 3

    * New features of the Central Station 2 (Part No. 60213, 60214 or 60215) with the software update 4.2

    ** New features of the Mobile Station 2 (Part No. 60657/66955) with the Software Update 3.55


ATTENTION: adults only